Streamline elmo config

1 files changed, 23 insertions, 94 deletions

diff --git a/hostnix/creep/configuration.nix b/hostnix/creep/configuration.nix
index b09f60c..89207a5 100644
--- a/hostnix/creep/configuration.nix
+++ b/hostnix/creep/configuration.nix
@@ -1,74 +1,37 @@
-# Edit this configuration file to define what should be installed on
-# your system. Help is available in the configuration.nix(5) man page, on
-# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
-
-{ config, lib, pkgs, ... }:
+{ pkgs, ... }:
 
 {
-  imports =
-    [ # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-    ];
+  imports = [
+    ./hardware-configuration.nix
+  ];
+
+  nix.settings.experimental-features = [ "nix-command" "flakes" ];
 
-  # Use the systemd-boot EFI boot loader.
   boot.loader.systemd-boot.enable = true;
-  boot.loader.efi.canTouchEfiVariables = true;
+  # Raspberry Pi has no NVRAM.
+  boot.loader.efi.canTouchEfiVariables = false;
 
   boot.kernelPackages = pkgs.linuxPackages_rpi4;
+  # https://github.com/NixOS/nixpkgs/issues/122130#issuecomment-1568815007
+  # It's unclear if these are strictly necessary with the downstream kernel,
+  # but let's leave them in to keep working with mainline.
   boot.initrd.availableKernelModules = [ "uas" "pcie-brcmstb" "reset-raspberrypi" ];
 
-  networking.hostName = "creep"; # Define your hostname.
+  networking.hostName = "creep";
   networking.domain = "mou.fo";
-  # Pick only one of the below networking options.
-  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
-  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
-
-  # Set your time zone.
-  # time.timeZone = "Europe/Amsterdam";
-
-  # Configure network proxy if necessary
-  # networking.proxy.default = "http://user:password@proxy:port/";
-  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
-
-  # Select internationalisation properties.
-  # i18n.defaultLocale = "en_US.UTF-8";
-  # console = {
-  #   font = "Lat2-Terminus16";
-  #   keyMap = "us";
-  #   useXkbConfig = true; # use xkb.options in tty.
-  # };
-
-  # Enable the X11 windowing system.
-  # services.xserver.enable = true;
-
-
-  
+  # "Girls Gone Wireless" WiFi configured by nmtui.
+  networking.networkmanager.enable = true;
 
-  # Configure keymap in X11
-  # services.xserver.xkb.layout = "us";
-  # services.xserver.xkb.options = "eurosign:e,caps:escape";
-
-  # Enable CUPS to print documents.
-  # services.printing.enable = true;
-
-  # Enable sound.
-  # sound.enable = true;
-  # hardware.pulseaudio.enable = true;
-
-  # Enable touchpad support (enabled default in most desktopManager).
-  # services.xserver.libinput.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
+  time.timeZone = "Australia/Sydney";
   users.users.joe = {
     isNormalUser = true;
-    extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
+    description = "Joe Mou";
+    extraGroups = [ "wheel" ];
     openssh.authorizedKeys.keys = [
       "ssh-rsa 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 joe@sparky"
     ];
   };
 
-  # List packages installed in system profile. To search, run:
-  # $ nix search wget
   environment.systemPackages = with pkgs; [
     dig
     file
@@ -79,50 +42,16 @@
     tree
   ];
 
-  # Some programs need SUID wrappers, can be configured further or are
-  # started in user sessions.
-  # programs.mtr.enable = true;
-  # programs.gnupg.agent = {
-  #   enable = true;
-  #   enableSSHSupport = true;
-  # };
-
   programs.vim.defaultEditor = true;
   programs.nano.enable = false;
 
-  # List services that you want to enable:
-
-  # Enable the OpenSSH daemon.
   services.openssh.enable = true;
 
-  # Open ports in the firewall.
-  # networking.firewall.allowedTCPPorts = [ ... ];
-  # networking.firewall.allowedUDPPorts = [ ... ];
-  # Or disable the firewall altogether.
-  # networking.firewall.enable = false;
-
-  # Copy the NixOS configuration file and link it from the resulting system
-  # (/run/current-system/configuration.nix). This is useful in case you
-  # accidentally delete configuration.nix.
-  # system.copySystemConfiguration = true;
-
-  # This option defines the first version of NixOS you have installed on this particular machine,
-  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
-  #
-  # Most users should NEVER change this value after the initial install, for any reason,
-  # even if you've upgraded your system to a new NixOS release.
-  #
-  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
-  # so changing it will NOT upgrade your system.
-  #
-  # This value being lower than the current NixOS release does NOT mean your system is
-  # out of date, out of support, or vulnerable.
-  #
-  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
-  # and migrated your data accordingly.
-  #
-  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It's perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
   system.stateVersion = "23.11"; # Did you read the comment?
-
 }
-